HOME > Industries Served > BEX-INTER CORPORATION > Products

Products

WD-40

WD-40 SPECIALIST

The world-renowned multipurpose anti-rust lubricant ‘WD-40’ can prevent rust and corrosion on various tools, as well as dehumidify and damp-proof metal surfaces, reduce friction noises, and clean oil stains due to its excellent permeability, lubricative and cleaning effects.

Features

  • 방청·방부 작용

    Anti-rust / anti-corrosion

    When you apply WD-40 to a metal surface, it creates a fine protective film that helps prevent rust and corrosion of metals by blocking oxygen, moisture, salt, etc.

  • 침투 작용

    Permeability Effect

    When applied to a rusted or corroded area, WD-40 eliminates the hardened parts easily due to its powerful permeability; whilst, preventing further rust or corrosion from re-occurring.

  • 윤활 작용

    Lubrication Effect

    Due to a thin lubricant film formed from applying WD-40 to a metal part, it helps make the machines operate smoothly with reduced noise as well as cleaning all remaining residues in the process.

  • 제습·방습 작용

    Dehumidification & Damp-proofing

    Permeation of humidity is prevented by dehumidifying the metal surface and forming a thin protective film thereon. It especially protects electric appliances from short circuiting due to humidity.

  • 세척 작용

    Cleaning Effect

    ‘WD-40’ is able to clean/remove all impurities produced from rust/corrosion as well as any dirt formed after the use of oil or grease.

Comparison of the use of anti-rust treatments.

Metal without any anti-rust treatment

It started to rust during or immediately after the salt spray test.

Metal with general anti-rust oil Treatment

Metal treated with general anti-rust oil had delayed the reoccurrence of corrosion, but due to its weak performance, rust began to form after 2-3 months.

Metal with WD-40 Treatment

Metal treated with WD-40 was able to prevent the reoccurrence of corrosion for more than a year, due to its superior anti-rust performance.

Main purpose of use

  • Home appliances
    Motors

    When applying WD-40 to the motor in air-conditioners, condensers, fans in kitchens, vacuum cleaners, motor axis of fans, rotating axles, etc., it will reduce the noise and help to operate smoothly.

    Metal frames

    It can be used to remove rust and dirt on home appliances that are usually exposed to humidity, such as washing machines, dish washers, boilers, ovens, flame racks, etc.

  • Car Management

    It can be used to help windshield wipers move smoothly, reduce noise from door handles, remove humidity from seat rails and carburetors, and get rid of any asphalt tar other types of oil residues from car bodies.

  • Leisure Products

    Used for lubrication and prevention of corrosion on fishing rods, fishing support, wheel, etc.

  • Etc

    Used for lubrication and prevention of rust on various tools, Used to remove pencil/pen marks done on furniture or floor-boards, as well as to remove any residues left from gums or stickers,Used for lubrication and noise reduction on keyholes, locks, and hinges

Physical Properties

Physical Properties
Appearance Transparent or Semi-transparent Color Bright Amber
Specific Gravity 0.800±0.020(Measured at 72℉=22℃) Viscosity Measured at 40℃, 2.2cSt(㎡/s)
Ignition Point 110℉=43℃ Flexibility Below -110℉ = - 73℃
Volatile Part 78% weight Non-volatile Part 22% weight
Coated Area 25㎡ / ℓ Boiling Point At least 300℉ = 148℃
Stability at Low Temperature Excellent (Repeated the cooling test at up to -73℃ 4 times)

Warning: Unknown: Your script possibly relies on a session side-effect which existed until PHP 4.2.3. Please be advised that the session extension does not consider global variables as a source of data, unless register_globals is enabled. You can disable this functionality and this warning by setting session.bug_compat_42 or session.bug_compat_warn to off, respectively in Unknown on line 0